Meter Factor Editor

From PRAMS Plus Wiki
Revision as of 21:10, 27 March 2020 by Cody Gallagher (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Set default increments for meters that can be picked during set up from a drop-down menu.


Tools

Go to AnalystX2 > Tools > Meter Factor Editor:

Prams will have default numbers set up that can be added to or modified.

Tools - Meter Factor Editor.png

To add a factor select "Add", to modify an existing factor select it then click "Edit".

Prams defines the following:

Spring
The spring strength of an old gas meter. Springs are rarely used for modern equipment.
Range
A set containing the output values produced by a function Interval (mathematics).
Also called range is a set of real numbers that includes all numbers between any two numbers in the set Range (statistics), the difference between the highest and the lowest values in a set.
Meter Factor
The number obtained by dividing the gross standard volume of liquid passed through a meter, as measured by a prover during proving, by the corresponding meter-indicated volume at standard conditions.





Copyright © 2024 by PRAMS Plus LLC. All Rights Reserved.