Meter Factor Editor: Difference between revisions

From PRAMS Plus Wiki
Jump to navigation Jump to search
Created page with "''Set default increments for meters that can be picked during set up from a drop-down menu.'' ---- Go to AnalystX2 > Tools > Meter Factor Editor: Prams will have default num..."
 
mNo edit summary
Line 1: Line 1:
''Set default increments for meters that can be picked during set up from a drop-down menu.''
''Set default increments for meters that can be picked during set up from a drop-down menu.''
----
----
◄ [[Tools]]


Go to AnalystX2 > Tools > Meter Factor Editor:
Go to AnalystX2 > Tools > Meter Factor Editor:

Revision as of 12:49, 27 March 2020

Set default increments for meters that can be picked during set up from a drop-down menu.


◄ Tools

Go to AnalystX2 > Tools > Meter Factor Editor:

Prams will have default numbers set up that can be added to or modified.

To add a factor select "Add", to modify an existing factor select it then click "Edit".

Prams defines the following:

Spring
The spring strength of an old gas meter. Springs are rarely used for modern equipment.
Range
A set containing the output values produced by a function Interval (mathematics).
Also called range is a set of real numbers that includes all numbers between any two numbers in the set Range (statistics), the difference between the highest and the lowest values in a set.
Meter Factor
The number obtained by dividing the gross standard volume of liquid passed through a meter, as measured by a prover during proving, by the corresponding meter-indicated volume at standard conditions.