List of Tasks

Below are all Canned and Custom tasks available in PRAMS.

These tasks are also the available reports for InsightX2.

If there is a custom report that is not available in your installation please contact PRAMS for more details. Phone Number: 303-904-6855

---

◄ Manage Scheduled Tasks

Canned 'Built-In' Reports

---

31 Day Recap	A snapshot of the last 31 days from a given date. Available variants: 'Default' and 'Current Monthly Cums'
7 Day Prod/w Cums	Will display the last seven days with average, total production, and monthly cum. Available Variants: Area, District, Field, Field Office, Route, and State. All variants can be set to the Daily, Weekly, and Summary versions to coincide with what Run period is set for the correct title on a report. Variant added 11-15-2019: Daily-Comments, this will show the last 7 days with an average and underneath each selected site it will display the comments for those days if any. Supports logo image use.
Auto Fill Daily Shut In	This task will fill in the gauge sheet in PumperX2 if the day previous has 24 hours down and is Shut In. Generates a report that shows the count of how many sites this was applied to. Can be set to Default variant that will be on a daily run cycle and a Multi Day variant that will run on a weekly cycle. Does not support logo image use.	Default Variant MultiDay Variant
Custody vs Check Report	Showing the last 7 days of production for sales compared to the check meter reading. Will provide a difference in total MCF and in %. Does not support logo image use.
Daily Allocation	Automatically runs allocation for anything that is set up to allocate. Can be set up to run Once, Daily, Weekly, or Monthly. Can be set to Default or Enhanced logging. Will not generate a report, but can be viewed in the logs.
Daily Allocation (Catch Up)	Allocates all or user set sites for one month set in a date rage as mm/02/yy - mm/01/yy. The more sites, the longer this allocation will run. Set this allocation to run monthly towards the end of the work day. Can be set to Default or Enhanced logging. Will not generate a report, but can be viewed in the logs.
Daily Flare Report	Will send a report that will show total flared volume broken down by site. Also shows the volume total for the day before. To view the other 3 variant outputs click here Supports logo image use.	Default Variant
Daily Injection Report	Will generate a report that will show the injected volume, hours on, remarks, tubing pressure, and casing pressure.
Daily Production (Simple)	A simplified version of Daily Production Report, that shows hours on/off, daily volumes, pressures, stroke data, and remarks. The other variants, Today vs Yest, are to show today's production compared to yesterdays volumes while providing the difference (+\-). This report can be set by route, area, field, and state. The other variants can be found here.
Daily Production Alert	Will show any set triggers set in Global Settings. The other three variants to this task are to show Oil, Gas, or Water separately.
Daily Production Charts	Displays a report that shows the production data for a site for the last 12 months. The data displayed is a year back from the date specified. There are 5 total variants for this task and supports logo use.
Daily Production Export	Provides a excel document that shows production and pressure with remarks per day by site along with API. The second variant will add Choke (Column E) and Flare (Column K) volumes to the export. The third 'Delayed' will be two days back from the selected start date.
Daily Production Report	Will provide a report summary based on set variant that will show a total summary at the top with individual broken down summaries below. The report can be sorted by changing the variant during setup. The following categories can be applied for both regular sites and injected sites: Area, District, Field, Field Office, Prospect, Route, and State. Use this as gross water production is stored separately from Injected water volume. For the alternative Summary variant click here Supports logo use.
Daily Production Variance Report	Shows daily production set by variant compared against the 30 day average of the site for oil, gas, and water. The main report can be sorted by the following variants during setup: Area, District, Field, Field Office, Prospect, Route, and State. For the Simple X% variant report click here Does not support logo use.
Daily Tank Levels	Provides an inventory summary broken down by route that shows the daily gauge for each tank and the total stock it has accumulated.
Gas Prod/Downtime Report	Takes the days produced gas production and compares it to the prior day showing the difference. Takes the downtime hours and sums it by set variant. The report can be sorted by the following variants during setup: Area, District, Field, Field Office, Prospect, Route, and State. Does not support logo image use.
Gauge Sheets	Will provide the selected site gauge sheets for the previous month or for the current month as it progresses.
Line Pressure Alert	Will display any site that is greater than or less than the threshold pressure set during setup of the task. The pressure is required. Does not support logo image use.
Mail Grab	Typically used to grab a SCADA file before import. This task can go to a specific email set to search a subject line (set in Subject) to save any attachments to a specified folder path then archive withing the email account.
Oil Prod/Downtime Report	Takes the days produced oil production and compares it to the prior day showing the difference. Takes the downtime hours and sums it by set variant. The report can be sorted by the following variants during setup: Area, District, Field, Field Office, Prospect, Route, and State. Does not support logo image use.
Oil Tank Inventory Report	This report shows the tank capacity and the current oil and water barrels within the tank along with the % full of Oil and Oil+Water. It will then take the average of the last 30days of oil and calculate days until there is a full tank and if there is a load ready at the time of the report. The load volume can be set during setup of the task on the bottom left. The report can be sorted by the following variants during setup: Area, Route, or Area/Route. Does not support logo image use. Update 9-10-19: No longer shows water tanks but shows bbls of water in color cut tanks. Will only take tanks with an active effective date.
Production By Day	A highly detailed report that provides either the first or last 120 days of production in the life of a site. Also provides a chart showing the 120 day progress. Multiple sites will be stored in tabs in the bottom of the excel document. Does not support logo image use.
Tests By Day	A highly detailed report that provides either the first or last 120 days of daily well tests in the life of a site. Also provides a chart showing the 120 day progress. Multiple sites will be stored in tabs in the bottom of the excel document. Does not support logo image use.
Weekly Production Report	Provides a snapshot of the week from the day ran with a 7 day average for oil , gas, and water. The report can be sorted by the following variants during setup for daily or weekly: Area, District, Field, Field Office, Prospect, Route, and State. Supports logo use.
Weekly Production Review	Sums up each site by a variant for oil, gas, and water for the 7 day time frame also providing an average for each product. Does not support logo image use.
Weekly Production Variance	Take the production for the day and compares it to the seven day average while providing a difference and a variance percentage. Updated:8/8/2019 - Added forecast gas and a blank line at the bottom. The variants can be set to show oil, gas, and water for all sites or the top 100 outliers. Can also be set to show only
Weekly Single Product Report	Sums up each site by a single variant being oil, gas, or water for the 7 day time frame also providing an average for each product. Supports logo use.
Copyright © 2024 by PRAMS Plus LLC. All Rights Reserved.