Difference between revisions of "Fluid Levels"

From PRAMS Plus Wiki
Jump to navigation Jump to search
m
m
Line 7: Line 7:
  
 
Track the fluid levels by adding a record using "Add Row". To remove select the row you want and click "Remove Record' on the bottom right.  
 
Track the fluid levels by adding a record using "Add Row". To remove select the row you want and click "Remove Record' on the bottom right.  
 +
 +
This data can also be added via PumperX2 as part of a separate production tab.
 +
 +
  
 
   
 
   

Revision as of 21:05, 30 January 2020

Keep track of different types of fluids from echometer tests.


By going to AnalystX2 > Tools > Fluid Levels and selecting a site the following screen will appear:

Tools - Fluid Levels.png

Track the fluid levels by adding a record using "Add Row". To remove select the row you want and click "Remove Record' on the bottom right.

This data can also be added via PumperX2 as part of a separate production tab.



S.N. Depth (FT) Seating nipple depth in feet.
Top Perf (FT) Top perforation in feet.
Btm Perf (FT) Bottom perforation in feet.
Datum (FT) Elevation of wellhead in feet.
Fluid Level (FT) Fluid level in feet.
C/P BU (PSI/MIN) Casing pressure build up.
CP (PSI) Casing pressure
FAP (FT) Fluid above pump in feet.
GF (FT) Gas free fluid above pump.
FAP Change (FT) Change in gas free fluid above pump since last time well was shot.
PIP (PSI) Pump inlet pressure.
PHBP (PSI) Pump bottom hole pressure.
GAS RATE MD Calculated gas rate.
RUN TIME (%) Well run time in minutes.
Remarks Shooter comments.