Difference between revisions of "Daily Test Maintenance"
m |
m |
||
| Line 1: | Line 1: | ||
''The Daily Test Maintenance panel allows entering the results of a production test for a site.'' | ''The Daily Test Maintenance panel allows entering the results of a production test for a site.'' | ||
---- | ---- | ||
| + | ◄ [[Daily Processes]] | ||
Tests are occasionally acquired during the life of a site and provide a benchmark for site production. Daily Allocation calculations use these data when the Test Derivation Method H is used. | Tests are occasionally acquired during the life of a site and provide a benchmark for site production. Daily Allocation calculations use these data when the Test Derivation Method H is used. | ||
Revision as of 20:34, 2 April 2020
The Daily Test Maintenance panel allows entering the results of a production test for a site.
Tests are occasionally acquired during the life of a site and provide a benchmark for site production. Daily Allocation calculations use these data when the Test Derivation Method H is used.
You can access Daily Test Maintenance in AnalystX2 going to Daily Processes Daily Test Maintenance. You can also go to the Production tab when you click on a site in Site Maintenance and on the bottom right select Daily Tests.
On the left side highlight the appropriate site for test data entry.
When the panel appears, you may enter the test data for a specific date. For the date, use the format 2-digit Month / 2- digit Day / 4- digit Year.
Time is reported in hours:minutes.
For Oil and Water, enter the values in barrels and for Gas as MCF values.
Clicking Add Test adds a row for new data entry. Clicking Remove Test deletes the test data for the row selected.
The last entered test data will always be referenced when running allocations.