Equipment Definitions

Create and define equipment used in your company.

---

◄ Admin

Select AnalystX2 > Admin > Editing Equipment Definitions. The following Screen will open:

Equipment definitions must be added before any equipment can be added to a site.

A definition defines a class of equipment such as compressor, separator, or pump. Information can also be added about the equipment such as manufacturer, serial number and whether or not data capture is required for the equipment.

Adding Equipment

Click "Add Equipment Class" A row is automatically added, then give it a class name and description of equipment being defined. This can be a compressor, separator, pump, etc. If required, a class of equipment can be removed by clicking "Remove Selected Class".

Adding Properties

Add the equipment property name such as manufacturer for the item you are adding. Click "Add Equipment Property" and another row will be available for input.

Setup some of the identification items that you would keep for that class of equipment, for example, "Manufacturer" of the equipment, model number and any other identifying characteristics.

The Equipment Property will not change over the life span of the item.

This Property can be entered as one of the following types: Text, Integer, Decimal, Boolean, Date, or Time. Click the down arrow to view these choices.

If data capture is required for this item, place a check mark next to the item.

Adding Capture Data

Add Equipment Capture. Provide a name for the captured data. These items can be things such as Outlet Pressure, Inlet Pressure, Sample Date. Indicate which items require data capture with a check mark on the far-right side.

If any item is checked for data capture then the run time box must also be checked.

Set the Type of data: Text, Integer, Decimal, Boolean, Date, or Time. Click the down arrow to view these choices.

Save Changes when done.

Custom Capture Types

At the top select Custom Capture Types. As you add types they will be stored to this list and can be edited later.

To create a new type select "New Type". Add a name to the list and then then where it says New Item change that to the type desired. If you need more than two of the types go to the last type and press Enter. This will create a new blank line. To delete a line delete out the text then press enter.

These types can be added to the Capture drop-down lists and there inst a limit to what you can add.

Copyright © 2024 by PRAMS Plus LLC. All Rights Reserved.