Equipment Definitions - Revision history

Cody Gallagher at 21:47, 11 March 2020

2020-03-11T21:47:53Z

Cody Gallagher at 20:11, 11 March 2020

2020-03-11T20:11:00Z

Cody Gallagher at 19:56, 11 March 2020

2020-03-11T19:56:13Z

Cody Gallagher at 17:58, 11 March 2020

2020-03-11T17:58:42Z

Cody Gallagher: Created page with "''Create and define equipment used in your company. '' Equipment definitions must be added before any equipment can be added to a site. A definition defines a class of equipm..."

2020-03-11T17:46:32Z

Created page with "''Create and define equipment used in your company. '' Equipment definitions must be added before any equipment can be added to a site. A definition defines a class of equipm..."

New page

''Create and define equipment used in your company. ''

Equipment definitions must be added before any equipment can be added to a site. A definition defines a class of equipment such as compressor, separator, or pump. Information can also be added about the equipment such as manufacturer, serial number and whether or not data capture is required for the equipment

Equipment Definitions is accessed by clicking on Admin then Equipment Definitions
When Clicked, the module appears as below.Click Add Equipment Class. A row is automatically added. Name the class of equipment being defined. These can be compressor, separator, pump, etc. If required, a class of equipment can be removed by clicking Remove Selected Class.Add the Equipment property name such as “Manufacturer” for the item you are adding. Clicking Add Equipment Property will add another row for input. Setup some of the identification items that you would keep for that class of equipment, for example, "Manufacturer" of the equipment, model number and any other identifying characteristics. The Equipment Property will not change over the life span of the item.
This Property can be entered as one of the following types: Text, Integer, Decimal, Boolean, Date, or Time. Click the down arrow to view these choices.

If data capture is required for this item, place a check mark next to the item.

Add Equipment Capture. Provide a name for the captured data. These items can be things such as Outlet Pressure, Inlet Pressure, Sample Date. Indicate which items require data capture with a check mark on the far-right side.

If any item is checked for data capture then the Runtime box must also be checked.

Set the Type of data: Text, Integer, Decimal, Boolean, Date, or Time. Click the down arrow to view these choices.

Save Changes when done.

← Older revision		Revision as of 21:47, 11 March 2020
Line 38:		Line 38:
	Save Changes when done.		Save Changes when done.

−	<u>Custom Capture Types</u>	+	<u>Custom Capture Types</u>
		+
		+	At the top select Custom Capture Types. As you add types they will be stored to this list and can be edited later.
		+
		+	To create a new type select "New Type". Add a name to the list and then then where it says New Item change that to the type desired. If you need more than two of the types go to the last type and press Enter. This will create a new blank line. To delete a line delete out the text then press enter.
		+
		+	These types can be added to the Capture drop-down lists and there inst a limit to what you can add.

@@ Line 16: / Line 16: @@
 Click "Add Equipment Class" A row is automatically added, then give it a class name and description of equipment being defined. This can be a compressor, separator, pump, etc. If required, a class of equipment can be removed by clicking "Remove Selected Class".
-Add the Equipment property name such as “Manufacturer” for the item you are adding. Clicking Add Equipment Property will add another row for input. Setup some of the identification items that you would keep for that class of equipment, for example, "Manufacturer" of the equipment, model number and any other identifying characteristics.  The Equipment Property will not change over the life span of the item.
+<u>Adding Properties</u>
-If data capture is required for this item, place a check mark next to the item.
+Add the equipment property name such as manufacturer for the item you are adding. Click "Add Equipment Property" and another row will be available for input.
 Add Equipment Capture. Provide a name for the captured data. These items can be things such as Outlet Pressure, Inlet Pressure, Sample Date.   Indicate which items require data capture with a check mark on the far-right side.
-If any item is checked for data capture then the Runtime box must also be checked.
+If any item is checked for data capture then the run time box must also be checked.
 Set the Type of data: Text, Integer, Decimal, Boolean, Date, or Time. Click the down arrow to view these choices.
+<u>Custom Capture Types</u>

@@ Line 12: / Line 12: @@
 A definition defines a class of equipment such as compressor, separator, or pump. Information can also be added about the equipment such as manufacturer, serial number and whether or not data capture is required for the equipment.
-<u></u>
+<u>Adding Equipment</u>
-Click Add Equipment Class. A row is automatically added. Name the class of equipment being defined. These can be compressor, separator, pump, etc. If required, a class of equipment can be removed by clicking Remove Selected Class.Add the Equipment property name such as “Manufacturer” for the item you are adding. Clicking Add Equipment Property will add another row for input. Setup some of the identification items that you would keep for that class of equipment, for example, "Manufacturer" of the equipment, model number and any other identifying characteristics.  The Equipment Property will not change over the life span of the item.
+Click "Add Equipment Class" A row is automatically added, then give it a class name and description of equipment being defined. This can be a compressor, separator, pump, etc. If required, a class of equipment can be removed by clicking "Remove Selected Class".
 This Property can be entered as one of the following types: Text, Integer, Decimal, Boolean, Date, or Time. Click the down arrow to view these choices.

@@ Line 1: / Line 1: @@
 ''Create and define equipment used in your company. ''
-Equipment definitions must be added before any equipment can be added to a site. A definition defines a class of equipment such as compressor, separator, or pump. Information can also be added about the equipment such as manufacturer, serial number and whether or not data capture is required for the equipment
+◄ [[Admin]]
-Equipment Definitions is accessed by clicking on Admin then Equipment Definitions
+[[File:Admin - Equipment Definitions.png|right|border|800px]]
-When Clicked, the module appears as below.Click Add Equipment Class. A row is automatically added. Name the class of equipment being defined. These can be compressor, separator, pump, etc. If required, a class of equipment can be removed by clicking Remove Selected Class.Add the Equipment property name such as “Manufacturer” for the item you are adding. Clicking Add Equipment Property will add another row for input. Setup some of the identification items that you would keep for that class of equipment, for example, "Manufacturer" of the equipment, model number and any other identifying characteristics.  The Equipment Property will not change over the life span of the item.
 This Property can be entered as one of the following types: Text, Integer, Decimal, Boolean, Date, or Time. Click the down arrow to view these choices.
@@ Line 18: / Line 28: @@
 Save Changes when done.